Frigidaire Washer Repair
Across Staten Island.
Same-day Frigidaire washer repair across all 12 Staten Island ZIPs. NYC DCWP licensed, $1M insured, English & Русский.
What we run across Staten Island, every week.
What we see on Frigidaire washers
across Staten Island.
Frigidaire washers in Staten Island come in two main lines: FFTW top loaders for budget-conscious buyers and FFFW front loaders (along with the premium Gallery line) for households that want larger capacity and higher spin speeds. The two architectures share some parts — drain pump, water inlet valve — but use different drive systems and have distinct failure profiles.
Frigidaire front loaders historically used a belt-drive motor with carbon brushes. When the brushes wear down past their wear limit (typically 7-10 years), the motor either stops entirely or runs intermittently with arcing inside the motor housing. Replacement is brushes plus inspection of the commutator surface. Top loaders use a more conventional drive system but share the drain pump platform with the front loaders — when a drain hose clogs or the pump impeller jams, the E20 error displays.
We stock OEM drain pumps, door boots (bellows), motor brushes, lid switches, and water inlet valves for Frigidaire FFTW and FFFW washers. The bellows leak is one of the most common Staten Island calls on older Frigidaire front-loaders — the rubber boot dries out and cracks at the lower seal.
Frigidaire Washer models we service in Staten Island
Frigidaire Washer symptoms
we fix every week.
Drain pump impeller jammed or drain hose blocked. We pull the bottom pump access, check the impeller for foreign objects (coins, buttons, underwires are typical), and clear the drain line if needed. Pump motor failure is less common than impeller jam.
Water inlet valve has failed or household supply pressure is too low. We test inlet pressure at the valve and verify both hot and cold solenoids open. Inlet screen clog is also common in Staten Island municipal water.
Pressure switch fault or actual overflow condition. The control has detected water level higher than expected. We test the pressure switch and check the dispenser solenoids — sometimes a stuck solenoid is the real cause.
Door lock failure on front loaders, lid switch failure on top loaders. The control reads the door as open and aborts the cycle. We test the microswitch and replace the lock assembly if needed.
Drive motor carbon brushes worn down or motor electrical fault. Brushes wear out after 7-10 years on Frigidaire belt-drive front loaders. We inspect brushes and commutator before deciding brush-only vs full motor replacement.
Door boot crack on older Frigidaire front loaders. The rubber dries out and hairline cracks open at the 6 o'clock position during spin. Bellows replacement is a 90-minute job and we inspect the sump hose connection on the same visit.
Seeing a code on
your Frigidaire washer?
Most Frigidaire fault codes point to a specific failed component. Here's what the most common ones mean on Staten Island calls.
No fill detected — inlet valve, inlet screen clog, or low supply pressure. Test pressure at the valve first.
Drain pump impeller jam or hose blockage. Check impeller before replacing the pump. Check that the drain hose isn't kinked behind the unit. If the problem continues, call (929) 261-4444 to schedule repair.
Pressure switch fault or actual overflow. Sometimes a stuck dispenser solenoid is the root cause.
Door lock (front load) or lid switch (top load) failure. Microswitch test confirms. Make sure the door is fully closing and nothing is blocking the latch. If the problem continues, call (929) 261-4444 to schedule repair.
Motor brushes worn on belt-drive front loaders, or motor electrical fault. Brushes-only repair is often possible.
Water heater element fault on heated models. Resistance test before replacement. Try a 5-minute power-off reset. If the problem continues, call (929) 261-4444 to schedule repair.
One technician.
Every Frigidaire washer call.
- The person who diagnoses your Frigidaire washer is the person who fixes it — no call center, no subcontractors, no handoff.
- Direct experience with Frigidaire washers on the Staten Island service network — same brand, same models, every week.
- Written quote on-site before any work begins — no surprises, no upsell pressure.
- 90-day parts and labor warranty in writing on every invoice.
Honest pricing.
No surprises.
applied to repair
when you proceed
Most Staten Island repairs land between $220 and $580 including parts and labor. Exact quote on-site before any work begins.
Frigidaire washers across
all 12 Staten Island ZIPs.
North Shore, East Shore, South Shore, Mid-Island — same-day Frigidaire washer repair anywhere on Staten Island.
What Staten Island homeowners say.
"Fixed my Maytag washer in Great Kills, Staten Island on the first visit. Quick diagnosis, professional work, and no unnecessary upselling. Very satisfied."
"I called Premier to come and inspect my Kitchenaid dishwasher. I have not been able to use it for a few days cause it was leaking. They came right away and fixed it."
"Very pleased with my washing machine repair. Technician was courteous, attentive and finished the job ahead of schedule. Would definitely recommend."
"Badma was a great technician. He was very friendly, professional, did a quick diagnostic and a great job fixing our washing machine. Would recommend."
Frigidaire washer repair
in Staten Island — FAQ.
Across Frigidaire washers in the 12 Staten Island ZIPs, the call we run most often is what shows up as “E20 drain error / standing water.” Drain pump impeller jammed or drain hose blocked. We pull the bottom pump access, check the impeller for foreign objects (coins, buttons, underwires are typical), and clear the drain line if needed. Pump motor failure is less common than impeller jam.
E10 on a Frigidaire washer points to water inlet. No fill detected — inlet valve, inlet screen clog, or low supply pressure. Test pressure at the valve first.
Yes — we regularly service the Frigidaire washer families that are common in Staten Island: FFFW5000QW, FFTW4120SW, FFFS5115PW, GLTF1670AS, FAFW3801LW, and most others in the Frigidaire catalog. If your model is unusual, tell us when you book and we'll confirm parts availability before the visit.
Most Frigidaire washer repairs finish on the first visit — typically 45 to 90 minutes once the right part is in hand. We stock the most common Frigidaire washer service parts on the truck, so single-visit completion is the norm in Staten Island.
Yes. We fit OEM (original equipment manufacturer) Frigidaire parts on every Frigidaire washer repair. Aftermarket parts tend to fit imprecisely, fail sooner, and complicate any future manufacturer warranty claim — we don't carry them.
Rule of thumb: if the Frigidaire washer is under eight years old and the repair quotes at less than half the cost of a comparable new Frigidaire unit, repair is the right call. We give you a frank assessment on-site, in writing, with no pressure either way.
Yes, most days. We run calls across all 12 Staten Island ZIPs from 10301 St. George down to 10314 Bulls Head. Morning bookings usually get a same-day window; afternoon bookings get late-afternoon or evening. We confirm your specific time slot the moment you book.
Related repairs
across Staten Island.
Other Frigidaire services
Other brands · Washer repair
Your Frigidaire washer fixed today.
Pick a slot online or call. Mon–Fri 8 AM – 10 PM · Sat–Sun 9 AM – 5 PM.
📅 Book Online — Pick Your Time 📞 Call (929) 261-4444