Frigidaire Dishwasher Repair
Across Staten Island.
Same-day Frigidaire dishwasher repair across all 12 Staten Island ZIPs. NYC DCWP licensed, $1M insured, English & Русский.
What we run across Staten Island, every week.
What we see on Frigidaire dishwashers
across Staten Island.
Frigidaire dishwashers in Staten Island come in two main lines: FGID Gallery for premium and FFCD for entry-level units. Both use a conventional wash-motor and drain-pump architecture — there's no heat-pump option on Frigidaire dishwashers like there is on premium Bosch — and the failure profiles are predictable.
The i20 drain restriction error is the single most common Frigidaire dishwasher call we run in Staten Island. The control measures pump drain output during the drain stage; when the pump can't move water at the expected rate within the timeout window, i20 displays and the cycle aborts with standing water in the tub. Usually it's an impeller jam (food debris, broken glass, label paper) rather than a pump motor failure.
We stock OEM drain pumps, water inlet valves, heater elements, door springs, and pressure switches for Frigidaire FGID and FFCD dishwashers. The door spring failure is the other common call — Frigidaire uses cable-and-spring assemblies that stretch over time and let the door slam shut.
Frigidaire Dishwasher models we service in Staten Island
Frigidaire Dishwasher symptoms
we fix every week.
Drain pump impeller jam or drain hose blockage. The control timed out waiting for water to evacuate. We pull the bottom filter and check the pump impeller for debris — most i20 calls resolve at the impeller without needing pump replacement.
Base pan float has triggered — water has accumulated where it shouldn't. We open the bottom panel, dry the pan, and pressurize the supply to find the actual leak source: hose joint, inlet valve seep, or door gasket weep.
Water inlet valve has failed or household supply pressure is too low. We test inlet pressure at the valve before replacement — pressure-good but no-fill confirms the solenoid is dead.
Wash motor electrical fault. We test motor windings before replacement — sometimes a loose harness connector at the sump is the real cause. Try unplugging the unit for 5 minutes. If the problem continues, call (929) 261-4444 to schedule repair.
Heater element open circuit. The element sits in the sump; when it fails, water never reaches wash temperature and dishes don't dry. Resistance test confirms — replacement.
Door spring cable stretched or broken. Frigidaire uses two spring cables — we replace as a pair so the door stays even and the surviving spring isn't stressed.
Soft drain restriction below the threshold that triggers i20. Same diagnostic as i20 — pump impeller, drain hose, air gap — but caught earlier in the failure curve.
Seeing a code on
your Frigidaire dishwasher?
Most Frigidaire fault codes point to a specific failed component. Here's what the most common ones mean on Staten Island calls.
Drain pump impeller jam or drain line blockage. Check impeller before reaching for pump replacement.
Base pan float triggered — find leak source before resetting. Turn off the water supply at the wall and unplug the unit. If the problem continues, call (929) 261-4444 to schedule repair.
Inlet valve or supply pressure issue. Test pressure before valve replacement. Make sure both water supply valves at the wall are fully open. If the problem continues, call (929) 261-4444 to schedule repair.
Wash motor electrical fault. Check harness before reaching for the motor. Try unplugging the unit for 5 minutes, then power back on. If the problem continues, call (929) 261-4444 to schedule repair.
Wash motor failure detected by the control. Try unplugging the unit for 5 minutes, then power back on. If the problem continues, call (929) 261-4444 to schedule repair.
Vent flap or actuator fault on heated-dry models. Try a 5-minute power-off reset. If the problem continues, call (929) 261-4444 to schedule repair.
One technician.
Every Frigidaire dishwasher call.
- The person who diagnoses your Frigidaire dishwasher is the person who fixes it — no call center, no subcontractors, no handoff.
- Direct experience with Frigidaire dishwashers on the Staten Island service network — same brand, same models, every week.
- Written quote on-site before any work begins — no surprises, no upsell pressure.
- 90-day parts and labor warranty in writing on every invoice.
Honest pricing.
No surprises.
applied to repair
when you proceed
Most Staten Island repairs land between $220 and $580 including parts and labor. Exact quote on-site before any work begins.
Frigidaire dishwashers across
all 12 Staten Island ZIPs.
North Shore, East Shore, South Shore, Mid-Island — same-day Frigidaire dishwasher repair anywhere on Staten Island.
What Staten Island homeowners say.
"I called Premier to come and inspect my Kitchenaid dishwasher. I have not been able to use it for a few days cause it was leaking. They came right away and fixed it."
"Premier appliance was fantastic. Badma was professional and fixed my dishwasher with no issue. I highly recommend premier appliance."
"Great! Very responsible and fast! They replaced my dishwasher motor and some other parts that needed to be replaced. Recommend them!"
"Badma was a great technician. He was very friendly, professional, did a quick diagnostic and a great job fixing our washing machine. Would recommend."
Frigidaire dishwasher repair
in Staten Island — FAQ.
Across Frigidaire dishwashers in the 12 Staten Island ZIPs, the call we run most often is what shows up as “i20 drain restriction error.” Drain pump impeller jam or drain hose blockage. The control timed out waiting for water to evacuate. We pull the bottom filter and check the pump impeller for debris — most i20 calls resolve at the impeller without needing pump replacement.
i20 on a Frigidaire dishwasher points to drain restriction. Drain pump impeller jam or drain line blockage. Check impeller before reaching for pump replacement.
Yes — we regularly service the Frigidaire dishwasher families that are common in Staten Island: FGID2466QF, FFCD2418US, FGID2479SF, FFCD2413US, FGIP2479SF, and most others in the Frigidaire catalog. If your model is unusual, tell us when you book and we'll confirm parts availability before the visit.
Most Frigidaire dishwasher repairs finish on the first visit — typically 45 to 90 minutes once the right part is in hand. We stock the most common Frigidaire dishwasher service parts on the truck, so single-visit completion is the norm in Staten Island.
Yes. We fit OEM (original equipment manufacturer) Frigidaire parts on every Frigidaire dishwasher repair. Aftermarket parts tend to fit imprecisely, fail sooner, and complicate any future manufacturer warranty claim — we don't carry them.
Rule of thumb: if the Frigidaire dishwasher is under eight years old and the repair quotes at less than half the cost of a comparable new Frigidaire unit, repair is the right call. We give you a frank assessment on-site, in writing, with no pressure either way.
Yes, most days. We run calls across all 12 Staten Island ZIPs from 10301 St. George down to 10314 Bulls Head. Morning bookings usually get a same-day window; afternoon bookings get late-afternoon or evening. We confirm your specific time slot the moment you book.
Related repairs
across Staten Island.
Other Frigidaire services
Other brands · Dishwasher repair
Your Frigidaire dishwasher fixed today.
Pick a slot online or call. Mon–Fri 8 AM – 10 PM · Sat–Sun 9 AM – 5 PM.
📅 Book Online — Pick Your Time 📞 Call (929) 261-4444