Frigidaire Oven Repair
Across Staten Island.
Same-day Frigidaire oven repair across all 12 Staten Island ZIPs. NYC DCWP licensed, $1M insured, English & Русский.
What we run across Staten Island, every week.
What we see on Frigidaire ovens
across Staten Island.
Frigidaire ovens and ranges in Staten Island span the Gallery and Professional lines, sharing many internal parts with the broader Electrolux appliance family — bake element, broil element, glow-bar igniter on gas models, RTD oven temperature sensor, and most door hardware are platform-shared. That parts commonality means availability is good even on models five-plus years old.
The F10 runaway temperature error is the one to treat seriously. F10 means the control has detected the oven going above safe temperature — either the oven temperature sensor is reading false-low and the control is overcompensating, or a heating relay has stuck closed and the element won't stop heating. We diagnose carefully before clearing the code; running an oven with F10 unresolved is a fire risk.
Outside of F10, the most common Frigidaire oven call we run is bake element burnout (visible coil break at the bottom of the cavity). On gas Frigidaire ranges we see glow-bar igniter failures — the igniter lights but doesn't get hot enough to open the gas safety valve. We carry OEM bake elements, broil elements, igniters, RTD sensors, and door hinges for the Frigidaire Gallery and Professional families.
Frigidaire Oven models we service in Staten Island
Frigidaire Oven symptoms
we fix every week.
Bake element open circuit. Visible break in the coil at the bottom of the cavity — usually obvious on inspection. Continuity test confirms. Element replacement is 30 minutes once the oven cools.
Broil element open. Element at the top of the cavity — same diagnostic as bake. On older Frigidaire ranges we sometimes find a broken element bracket alongside the failed element.
Serious — temperature exceeded safe range. The control thinks the oven is too hot. We diagnose between sensor false-reading and stuck heating relay before clearing the code. Don't ignore F10.
Membrane switch button stuck or shorted on the control panel. Power-off reset for 5 minutes sometimes clears transient stucks. Persistent F11 means membrane panel replacement.
Glow-bar igniter at end of life. The igniter visibly glows but doesn't reach the temperature required to open the gas safety valve. Igniter replacement. Make sure the gas supply valve is fully open and try one more start cycle. If the problem continues, call (929) 261-4444 to schedule repair.
Oven temperature sensor (RTD) drifted. Healthy sensor reads about 1080 ohms at room temperature; drift outside means the control reads the wrong cavity temperature and shuts off the element too early. Sensor replacement.
Seeing a code on
your Frigidaire oven?
Most Frigidaire fault codes point to a specific failed component. Here's what the most common ones mean on Staten Island calls.
Main control board fault. Power-off reset sometimes clears; persistent F1 means board replacement. Try a 5-minute power-off reset — sometimes that's the whole fix. If the problem continues, call (929) 261-4444 to schedule repair.
Over-temperature condition — serious. Diagnose between sensor false-reading and stuck heating relay before clearing. Try a 5-minute power-off reset — sometimes that's the whole fix. If the problem continues, call (929) 261-4444 to schedule repair.
Membrane switch button stuck or shorted. Power-off reset sometimes clears. Try a 5-minute power-off reset — that often clears stuck buttons. If the problem continues, call (929) 261-4444 to schedule repair.
Oven temperature sensor RTD circuit open. Sensor replacement. Try unplugging the unit for 5 minutes. If the problem continues, call (929) 261-4444 to schedule repair.
Oven temperature sensor RTD shorted. Sensor replacement. Try unplugging the unit for 5 minutes. If the problem continues, call (929) 261-4444 to schedule repair.
One technician.
Every Frigidaire oven call.
- The person who diagnoses your Frigidaire oven is the person who fixes it — no call center, no subcontractors, no handoff.
- Direct experience with Frigidaire ovens on the Staten Island service network — same brand, same models, every week.
- Written quote on-site before any work begins — no surprises, no upsell pressure.
- 90-day parts and labor warranty in writing on every invoice.
Honest pricing.
No surprises.
applied to repair
when you proceed
Most Staten Island repairs land between $220 and $580 including parts and labor. Exact quote on-site before any work begins.
Frigidaire ovens across
all 12 Staten Island ZIPs.
North Shore, East Shore, South Shore, Mid-Island — same-day Frigidaire oven repair anywhere on Staten Island.
What Staten Island homeowners say.
"Great service! My stove burners weren't igniting in Grasmere, Staten Island. The technician quickly found the issue and fixed everything the same day."
"I was very pleased with the quality of care for this repair. They were quick, they were reliable, and they fix the problem the same day."
"Great! Very responsible and fast! They replaced my dishwasher motor and some other parts that needed to be replaced. Recommend them!"
"Great experience. Extremely timely, clean and smart. He took apart my dryer, quickly diagnosed the problem and repaired it. The best part was the price."
Frigidaire oven repair
in Staten Island — FAQ.
Across Frigidaire ovens in the 12 Staten Island ZIPs, the call we run most often is what shows up as “Oven won't preheat / bake element doesn't glow.” Bake element open circuit. Visible break in the coil at the bottom of the cavity — usually obvious on inspection. Continuity test confirms. Element replacement is 30 minutes once the oven cools.
F1 on a Frigidaire oven points to control board. Main control board fault. Power-off reset sometimes clears; persistent F1 means board replacement. Try a 5-minute power-off reset — sometimes that's the whole fix. If the problem continues, call (929) 261-4444 to schedule repair.
Yes — we regularly service the Frigidaire oven families that are common in Staten Island: FFEF3054TS, FFGF3054TS, FGEF3036TF, GCRE3038AF, FGGF3036TF, and most others in the Frigidaire catalog. If your model is unusual, tell us when you book and we'll confirm parts availability before the visit.
Most Frigidaire oven repairs finish on the first visit — typically 45 to 90 minutes once the right part is in hand. We stock the most common Frigidaire oven service parts on the truck, so single-visit completion is the norm in Staten Island.
Yes. We fit OEM (original equipment manufacturer) Frigidaire parts on every Frigidaire oven repair. Aftermarket parts tend to fit imprecisely, fail sooner, and complicate any future manufacturer warranty claim — we don't carry them.
Rule of thumb: if the Frigidaire oven is under eight years old and the repair quotes at less than half the cost of a comparable new Frigidaire unit, repair is the right call. We give you a frank assessment on-site, in writing, with no pressure either way.
Yes, most days. We run calls across all 12 Staten Island ZIPs from 10301 St. George down to 10314 Bulls Head. Morning bookings usually get a same-day window; afternoon bookings get late-afternoon or evening. We confirm your specific time slot the moment you book.
Related repairs
across Staten Island.
Other Frigidaire services
Other brands · Oven repair
Your Frigidaire oven fixed today.
Pick a slot online or call. Mon–Fri 8 AM – 10 PM · Sat–Sun 9 AM – 5 PM.
📅 Book Online — Pick Your Time 📞 Call (929) 261-4444